

Two-car garage, full-flake system
The slab had oil spots near the door and a long crack down the middle. We ground the whole floor, filled the crack, checked for damp, and ran a full-flake system with a clear top coat.
Full-flake, polyaspartic, and solid systems over a ground, tested slab.

A garage floor coating is a resin system laid over ground concrete: a base coat, color or flake, and a clear top coat. In Apopka garages, the base and the prep do the hard work, since heat and damp test the bond all year.
Pick by use, not by looks alone. Full-flake hides wear best. Polyaspartic cures fast and holds color in sun. Solid color suits shops. We bring samples and talk it through at the look.
We grind the whole slab to open the pores. The trade calls that profile CSP 3 to 4, which in plain terms means rough enough for the coat to grip deep, not sit on top. Dust is caught at the tool as we go.
Then we fix what the grind shows: cracks, pits, and oil spots. A damp check comes next. If the slab reads wet, a moisture primer goes down before the base coat. Skip any of this and the floor tells on you in a year.



The slab had oil spots near the door and a long crack down the middle. We ground the whole floor, filled the crack, checked for damp, and ran a full-flake system with a clear top coat.


This older garage had a thin paint coat that was lifting in sheets. We ground the old coat off, patched two spalls, and laid a full-flake floor in a warm gray blend.
The owner parks in full sun, so the door line took a fast-cure coat that holds its color. The slab was dry, the grind was clean, and the car was back in two days later.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (407) 555-0139.
It turns on size, slab shape, and the system you pick. Use the calculator on this page for a planning range. Your firm price comes in writing after we look at the slab, before any work starts.
Most peel comes from weak prep: a thin coat rolled on a smooth or damp slab. We grind the slab open, test for damp, and fix cracks first. That is the whole ball game.
Walk times are hours for fast-cure tops. Cars take longer, often one to three days by system. Your return times come in writing at the walk-through.
Hot tires lift thin, soft coats. A full-build base with a hard top coat is made for Florida heat and daily parking. Tire marks wipe off; the coat stays down.
Flake gives the floor some tooth. On wet areas like lanais and pool decks we add grip to the top coat. Tell us how the floor gets used and we set the texture to match.
Pick your floor and its size. The range updates as you go.
Add-ons your floor may need
Every floor is different. Slab condition moves the final number more than size does.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.