

Two-car garage, polyaspartic system
A newer home with a fresh slab and a sealer that had to come off first. We ground the sealer away, then ran a polyaspartic system picked for fast cure and sun at the door.
Garage floors, lanais, and pool decks in Sorrento, coated over ground, tested prep.

Sorrento is the country side of the footprint: big lots, metal shops, and garages that hold mowers, trailers, and project cars along the Rock Springs run. Floors here work harder than most suburban garages.
Shop floors get the solid-color talk: a clean, bright coat that shows a dropped bolt and wipes up oil fast. Home garages lean flake. Both start with the same deep grind.
Well water and septic lots are the norm out here, and slabs on low ground can sweat on wet summer mornings. We check for that at the look and set the start time to suit the slab.
Tell us about the floor. We call back with a time to come look — the written price comes after the in-person look, before any work starts.
Rather talk? Call (407) 555-0139.
The full menu runs in every town we serve. Garages lead; lanais, decks, and shops follow.

Our most picked garage floor. Flake is spread thick into the base coat, then sealed with a clear top coat.

A swirled, one-of-a-kind finish for show garages and rooms that need to stand out.

A fast-cure coat that holds its color in sun and stands up well to hot tires.

Fast-cure coats can put many garages back in use the next day. Your dates are set in writing first.

Peeling kit floor or worn old coat? We grind it off and start the slab over the right way.

Coated floors for work rooms, home gyms, and living space built on a slab.

A sealed, easy-to-clean coat for plain concrete, with a clear talk on coat vs. stain first.

Grip under wet feet and a top coat that holds up in full Florida sun.

Outdoor flat work gets its own talk on sun, rain, and wear at the in-person look.

Tough floors for shops, stores, and work bays, planned around your hours.

Heavier builds for hard use, oil, and daily wear.

Big floors coated in planned parts so your work can keep moving.

Clean, bright floors for rooms where folks walk in and look down.


A newer home with a fresh slab and a sealer that had to come off first. We ground the sealer away, then ran a polyaspartic system picked for fast cure and sun at the door.
Size, slab shape, and system set the price. The calculator below gives a planning range from our own rates. Your firm price comes in writing after the in-person look.
Yes, on every job. Ground water and shade vary street by street here, so the test runs at your slab, not off a map. The reading sets whether a primer goes down.
Fast-cure tops often take cars in a day or two; deeper prep runs longer. Your return times come in writing at the walk-through.
Thin coats lift; full-build systems with hard tops are made for Florida heat. Tire marks wipe off the top coat.
Yes. Outdoor floors get grip for wet feet and a top that holds color in sun. Many owners book the garage and lanai on one visit.
Pick your floor and its size. The range updates as you go.
Add-ons your floor may need
Every floor is different. Slab condition moves the final number more than size does.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.